APPLYING TOUCH UP PAINT

Does your vehicle have a few minor scratches and dings to the exterior paint? If the exterior of your vehicle is in need of a little TLC to look its best, you may be able to fix the issues with car touch-up paint. Using touch-up paint is an easy way to cover up unsightly scratches, but there are a few things to consider before you start. Learn more about the basics of automotive touch-up paint below in this guide from Basil Chevrolet Inc., and your vehicle can soon look like new again on the roads of Jamestown and Westfield.

How to Touch Up Car Paint

Not sure how to touch up car paint? There are a few factors that will change what you should do if you want to cover up paint problems on your car. There are some cases where it’s best not to use a touch-up pen, as well. For example, if you have deep key scratches that go beyond the clear coat on your vehicle, then you could be dealing with rust problems. You want to make sure that you buff and prime these deeper scratches before you apply paint.

In addition, touch-up paint is applied differently than house paint or acrylic paints. This is because you have to dab on car paint rather than use long strokes. You’ll need to be very careful when applying so that you don’t mismatch the paint or cause overlap either. If you have deeper scratches, you’ll need to pre-treat the paint chips and scratches. You can get help with your paint job when you visit the service center at Basil Chevrolet Inc.. If you prefer to do it yourself, follow the tips below.

First, you will need to determine the extent of the damage. The level of damage determines the supplies you will need. You may need the following: the correct car touch-up paint, clear coat paint, rubbing compound, sandpaper and a sanding block, and a cotton cloth.

• Before you apply touch up paint, wash and wax the vehicle. Automotive touch-up paint needs a clean surface to adhere to.
• Find a shaded spot to work in. If possible, do not work in direct sunlight or in freezing temperatures. It is best to apply touch-up paint when the weather is mild.
• Make sure that you have the right car touch-up paint color before you start.
• Prep the damaged area of paint by removing any rust of flaking paint. If there is rust, use the sandpaper to remove it, then clean the area with the cotton cloth. Apply a rubbing compound to the treated area.
• Apply the automotive touch-up paint, and use as many coats as needed. Make sure you allow the touch up paint to dry before applying another coat. You may also need to sand the new paint to ensure it is flush against the old paint.
• When the painted area is smooth, apply clear coat for extra protection. If you like, you can then wet sand or buff the area for a more seamless appearance.

Contact Basil Chevrolet Inc. for More Information

If you have questions about how to apply car touch-up paint or you need to find the right automotive touch-up paint for your vehicle, we can help. Contact Basil Chevrolet Inc. today for more information.